# Advanced Settings

- [Slicing](/modules/print-settings/advanced-settings/slicing.md)
- [Brim/Skirt/Raft](/modules/print-settings/advanced-settings/slicing/brim-skirt-raft.md)
- [Dual Extrusion](/modules/print-settings/advanced-settings/slicing/dual-extrusion.md)
- [Heating & Cooling](/modules/print-settings/advanced-settings/slicing/heating-and-cooling.md)
- [Extrusion](/modules/print-settings/advanced-settings/extrusion.md)
- [Extrusion Parameters](/modules/print-settings/advanced-settings/extrusion/extrusion-parameters.md)
- [Custom Extrusion Width](/modules/print-settings/advanced-settings/extrusion/extrusion-parameters/custom-extrusion-width.md)
- [Flow Multiplier](/modules/print-settings/advanced-settings/extrusion/extrusion-parameters/flow-multiplier.md)
- [Retraction](/modules/print-settings/advanced-settings/extrusion/retraction.md): Retraction tells your printer to pull filament out of the hot end upon travel moves.
- [Retraction Distance](/modules/print-settings/advanced-settings/extrusion/retraction/retraction-distance.md): This is the distance, in millimetres, that the material is retracted from the nozzle tip, when a retraction is made.
- [Retraction Speed](/modules/print-settings/advanced-settings/extrusion/retraction/retraction-speed.md)
- [Retraction Z Hop](/modules/print-settings/advanced-settings/extrusion/retraction/retraction-z-hop.md)
- [Minimum Retraction Travel](/modules/print-settings/advanced-settings/extrusion/retraction/minimum-retraction-travel.md)
- [Layer Settings](/modules/print-settings/advanced-settings/layer-settings.md)
- [Layer Heights](/modules/print-settings/advanced-settings/layer-settings/layer-heights.md)
- [Top & Bottom Layers](/modules/print-settings/advanced-settings/layer-settings/top-and-bottom-layers.md)
- [Wall Order - Inner First](/modules/print-settings/advanced-settings/layer-settings/wall-order-inner-first.md): This setting determines which walls of a perimeter are printed first - outer or inner.
- [Perimeters](/modules/print-settings/advanced-settings/layer-settings/perimeters.md): This setting determines how many contours will be drawn around the print on every layer.
- [Speeds](/modules/print-settings/advanced-settings/speeds.md)
- [Print Speeds](/modules/print-settings/advanced-settings/speeds/print-speeds.md)
- [Travel Speeds](/modules/print-settings/advanced-settings/speeds/travel-speeds.md)
- [Infill](/modules/print-settings/advanced-settings/infill.md): The main purpose of infill is to provide internal support for top layers, which would otherwise have to bridge over empty space.
- [Infill Pattern](/modules/print-settings/advanced-settings/infill/infill-pattern.md): The infill pattern defines a structure that is used to fill the volume of the object.
- [Infill Density](/modules/print-settings/advanced-settings/infill/infill-density.md): This setting configures the density of the volume inside the print, which is a major factor in the strength of the final print.
- [Material](/modules/print-settings/advanced-settings/material.md)
- [Fiber](/modules/print-settings/advanced-settings/fiber.md): Fiber related print settings and their details
- [Support](/modules/print-settings/advanced-settings/support.md)
- [Custom GCode](/modules/print-settings/advanced-settings/custom-gcode.md)