> For the complete documentation index, see [llms.txt](https://docs.c6.fabheads.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.c6.fabheads.com/modules.md).

# Modules

- [Print Settings](https://docs.c6.fabheads.com/modules/print-settings.md)
- [Basic Settings](https://docs.c6.fabheads.com/modules/print-settings/basic-settings.md)
- [Advanced Settings](https://docs.c6.fabheads.com/modules/print-settings/advanced-settings.md): In the Advanced settings, all the power features of C6 are accessible.
- [Slicing](https://docs.c6.fabheads.com/modules/print-settings/advanced-settings/slicing.md)
- [Brim/Skirt/Raft](https://docs.c6.fabheads.com/modules/print-settings/advanced-settings/slicing/brim-skirt-raft.md)
- [Dual Extrusion](https://docs.c6.fabheads.com/modules/print-settings/advanced-settings/slicing/dual-extrusion.md)
- [Heating & Cooling](https://docs.c6.fabheads.com/modules/print-settings/advanced-settings/slicing/heating-and-cooling.md)
- [Extrusion](https://docs.c6.fabheads.com/modules/print-settings/advanced-settings/extrusion.md)
- [Extrusion Parameters](https://docs.c6.fabheads.com/modules/print-settings/advanced-settings/extrusion/extrusion-parameters.md)
- [Custom Extrusion Width](https://docs.c6.fabheads.com/modules/print-settings/advanced-settings/extrusion/extrusion-parameters/custom-extrusion-width.md)
- [Flow Multiplier](https://docs.c6.fabheads.com/modules/print-settings/advanced-settings/extrusion/extrusion-parameters/flow-multiplier.md)
- [Retraction](https://docs.c6.fabheads.com/modules/print-settings/advanced-settings/extrusion/retraction.md): Retraction tells your printer to pull filament out of the hot end upon travel moves.
- [Retraction Distance](https://docs.c6.fabheads.com/modules/print-settings/advanced-settings/extrusion/retraction/retraction-distance.md): This is the distance, in millimetres, that the material is retracted from the nozzle tip, when a retraction is made.
- [Retraction Speed](https://docs.c6.fabheads.com/modules/print-settings/advanced-settings/extrusion/retraction/retraction-speed.md)
- [Retraction Z Hop](https://docs.c6.fabheads.com/modules/print-settings/advanced-settings/extrusion/retraction/retraction-z-hop.md)
- [Minimum Retraction Travel](https://docs.c6.fabheads.com/modules/print-settings/advanced-settings/extrusion/retraction/minimum-retraction-travel.md)
- [Layer Settings](https://docs.c6.fabheads.com/modules/print-settings/advanced-settings/layer-settings.md)
- [Layer Heights](https://docs.c6.fabheads.com/modules/print-settings/advanced-settings/layer-settings/layer-heights.md)
- [Top & Bottom Layers](https://docs.c6.fabheads.com/modules/print-settings/advanced-settings/layer-settings/top-and-bottom-layers.md)
- [Wall Order - Inner First](https://docs.c6.fabheads.com/modules/print-settings/advanced-settings/layer-settings/wall-order-inner-first.md): This setting determines which walls of a perimeter are printed first - outer or inner.
- [Perimeters](https://docs.c6.fabheads.com/modules/print-settings/advanced-settings/layer-settings/perimeters.md): This setting determines how many contours will be drawn around the print on every layer.
- [Speeds](https://docs.c6.fabheads.com/modules/print-settings/advanced-settings/speeds.md)
- [Print Speeds](https://docs.c6.fabheads.com/modules/print-settings/advanced-settings/speeds/print-speeds.md)
- [Travel Speeds](https://docs.c6.fabheads.com/modules/print-settings/advanced-settings/speeds/travel-speeds.md)
- [Infill](https://docs.c6.fabheads.com/modules/print-settings/advanced-settings/infill.md): The main purpose of infill is to provide internal support for top layers, which would otherwise have to bridge over empty space.
- [Infill Pattern](https://docs.c6.fabheads.com/modules/print-settings/advanced-settings/infill/infill-pattern.md): The infill pattern defines a structure that is used to fill the volume of the object.
- [Infill Density](https://docs.c6.fabheads.com/modules/print-settings/advanced-settings/infill/infill-density.md): This setting configures the density of the volume inside the print, which is a major factor in the strength of the final print.
- [Material](https://docs.c6.fabheads.com/modules/print-settings/advanced-settings/material.md)
- [Fiber](https://docs.c6.fabheads.com/modules/print-settings/advanced-settings/fiber.md): Fiber related print settings and their details
- [Support](https://docs.c6.fabheads.com/modules/print-settings/advanced-settings/support.md)
- [Custom GCode](https://docs.c6.fabheads.com/modules/print-settings/advanced-settings/custom-gcode.md)
- [Preset Management](https://docs.c6.fabheads.com/modules/preset-management.md): Never lose your print settings - specific to your printer, quality or the part you're printing
- [Graphic/Project Settings](https://docs.c6.fabheads.com/modules/graphic-project-settings.md)
- [File Handling](https://docs.c6.fabheads.com/modules/file-handling.md): Load, save and delete files
- [Files in Cloud](https://docs.c6.fabheads.com/modules/file-handling/files-in-cloud.md)
- [Feedback](https://docs.c6.fabheads.com/modules/feedback.md)
- [GCode Preview](https://docs.c6.fabheads.com/modules/gcode-preview.md)
- [Layer Slider](https://docs.c6.fabheads.com/modules/gcode-preview/layer-slider.md)
- [Layer Playback](https://docs.c6.fabheads.com/modules/gcode-preview/layer-playback.md)
- [Save Job](https://docs.c6.fabheads.com/modules/gcode-preview/save-job.md)
- [Preview Info](https://docs.c6.fabheads.com/modules/gcode-preview/preview-info.md)
- [Views](https://docs.c6.fabheads.com/modules/views.md)
- [Print Bed](https://docs.c6.fabheads.com/modules/print-bed.md)
- [Slice Button](https://docs.c6.fabheads.com/modules/slice-button.md)
- [Transform](https://docs.c6.fabheads.com/modules/transform.md): Move, rotate, scale, mirror or pattern your objects
- [Translation](https://docs.c6.fabheads.com/modules/transform/translation.md): Move objects around
- [Rotation](https://docs.c6.fabheads.com/modules/transform/rotation.md)
- [Scaling](https://docs.c6.fabheads.com/modules/transform/scaling.md)
- [Mirror](https://docs.c6.fabheads.com/modules/transform/mirror.md)
- [Pattern](https://docs.c6.fabheads.com/modules/transform/pattern.md)
- [Printer Management](https://docs.c6.fabheads.com/modules/printer-management.md)
- [List Printers](https://docs.c6.fabheads.com/modules/printer-management/list-printers.md)
- [Manage Printers](https://docs.c6.fabheads.com/modules/printer-management/manage-printers.md)
- [Add New Printer](https://docs.c6.fabheads.com/modules/printer-management/add-new-printer.md)
- [C6 Connect](https://docs.c6.fabheads.com/modules/c6-connect.md)
- [Version Details](https://docs.c6.fabheads.com/modules/version-details.md)